Levolution Cap Component
The Levolution Cap component is a universal and reusable cap designed to prevent any lippage from occurring during installation. These caps are placed over the tile spacer and then tightened with the Levolution Evolver Tool to provide a consistent, even and level floor or wall installation. These caps are universal so they are compatible with each spacer profile (cross, flat, tee) and size (1/16 in, 1/8 in, 3/16 in). These caps have an open center so the installer can always see the grout lines to make sure they are straight. Caps are sold 50 caps per bag and include a De-Capper tool that removes the caps from the spacers for re-use or adjustment. Caps are designed to be reused up to 8 times depending on how aggressive installer is when removing as in kicking off or using the evolver tool to remove.
Levolution Decapper Tool
The Levolution Decapper Tool is a tool that removes the used Spacers from the Caps so the Caps may be reused.
Levolution Evolver Tool
The Levolution Evolver Tool is a reusable tensioning tool designed to aid in proper leveling of floor and wall tile installations. The Levolution Evolver Tool has a tensioning dial which allows for accurate clamping for different thicknesses of tile and stone. The Levolution Evolver Tool has a comfortable ergonomic handle and trigger that eliminates stress and fatigue on your hands. The Levolution Evolver Tool is easy to use and can be taken apart for cleaning or maintenance allowing one tool to be used on thousands of square feet. The Evolver Tool secures the caps to the tile spacers by pushing down rather than pulling or twisting like other systems which can scratch or pull tiles apart.
Levolution Flat, Cross and Tee Spacers - Yellow
The Levolution Spacers are tile spacers designed to provide precise spacing and leveling for your tile installation. These spacers are available in 3 sizes (1/16 in, 1/18 in, 3/16 in) and are compatible with any sized tile. Once the mortar is dry the spacer can be completely removed so nothing is left behind in the grout joint. Spacers are sold 50 pieces per bag. Spacers are available in Cross, Tee and Flat:
- Cross spacers are for general stack bond patterns where you have a 4 way intersection.
- The tee spacers are for offset or brick patterns.
- The flat spacers are to be used along the perimeter/wall of the installation.
Levolution Flat, Cross and Tee Spacers - White
The Levolution Spacers are tile spacers designed to provide precise spacing and leveling for your tile installation. These spacers are available in 3 sizes (1/16 in, 1/18 in, 3/16 in) and are compatible with any sized tile. Once the mortar is dry the spacer can be completely removed so nothing is left behind in the grout joint. Spacers are sold 50 pieces per bag. Spacers are available in Cross, Tee and Flat:
- Cross spacers are for general stack bond patterns where you have a 4 way intersection.
- The tee spacers are for offset or brick patterns.
- The flat spacers are to be used along the perimeter/wall of the installation.
Levolution Flat, Cross and Tee Spacers - Green
The Levolution Spacers are tile spacers designed to provide precise spacing and leveling for your tile installation. These spacers are available in 3 sizes (1/16 in, 1/18 in, 3/16 in) and are compatible with any sized tile. Once the mortar is dry the spacer can be completely removed so nothing is left behind in the grout joint. Spacers are sold 50 pieces per bag. Spacers are available in Cross, Tee and Flat:
- Cross spacers are for general stack bond patterns where you have a 4 way intersection.
- The tee spacers are for offset or brick patterns.
- The flat spacers are to be used along the perimeter/wall of the installation.