Ardex Designer Surfaces

Ardex designer surfaces allow for a wide array of finished surfaces that install fast thanks to an exclusive self-drying technology, and last for decades. Flooring toppings that range from turn-key pour and seal to artistic floors that can match any designer’s vision.

Premium Toppings

ARDEX ARDEX PC-T™

Vendor Item #PC-T

Polished Concrete Topping

ARDEX PC-T™ Polished Concrete Topping is a self-drying, self-leveling blend of Portland cements and other hydraulic cements for creating polished concrete floors.

Smooth concrete & non-porous surfaces
Install from 3/8" up to 2" neat and up to 5" with aggregate
Walkable in 2 – 3 hours
Polish in as little as 24 hours
Use with the ARDEX APCS
Packaging: 50 LBS

ARDEX SD-T™

Vendor Item #SD-T

Self-Drying Self-Leveling Concrete Topping

ARDEX SD-T® is a self-drying, self-leveling, no troweling, Portland cement-based topping for fast track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces.

Smooth concrete & non-porous surfaces
Install from 1/4" up to 2" neat, and up to 5" with aggregate
Walk on and seal in 2 hrs
For commercial, light industrial & residential applications
White or Gray
Packaging: 50 LBS

Pour and Polish

ARDEX K 521™

Vendor Item #K 521

Self-Leveling Concrete Topping with Aggregate Surface

ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm). Use ARDEX K 521 to provide a polished, “aggregate-exposed” surface. Polishing can proceed in as little as 24 hours.

Resurface indoor concrete
Walk on in 2-3 hours
Polish in as little as 24 hours
Dual Water Ratio
Use for interior floors only
Packaging: 50 LBS

ARDEX K 523™

Vendor Item #K 523

Self-Leveling Concrete Topping with Aggregate Surface

ARDEX K 523™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 523 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm). With black and white aggregates, ARDEX K 523 provides a polished, “aggregate-exposed” surface. Polishing can proceed in as little as 24 hours.

Resurface indoor concrete
Walk on in 2-3 hours
Polish in as little as 24 hours
Use for interior floors only
Packaging: 50 LBS

Pour and Seal, Pour and Polish

ARDEX K 520™

Vendor Item #K 520

Self-Leveling Concrete Topping

ARDEX K 520™ is a self-leveling, topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 520 can be installed up to 1″ (25 mm) thick neat and up to 3″ (7.5 cm) thick with the addition of appropriate aggregate.

Resurface Interior concrete
Walk on in 2-3 hrs
Seal or polish in 24 hrs
Installs up to 1" neat
Packaging: 50 LBS

ARDEX K 530™

Vendor Item #K 530

Decorative Concrete Topping

ARDEX K 530™ is a self-leveling, decorative topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 530 can be installed up to 1” (25 mm) thick neat and up to 3″ (7.5 cm) thick with the addition of approved decorative aggregates. Use ARDEX K 530 in areas where a decorative floor is desired to provide a hard, flat, smooth surface that can be sealed. Also use over concrete and terrazzo substrates in areas that require a polished surface. Sealing or polishing can proceed in as little as 24 hours.